Originally Posted by jcowling.Forum Rules. I just had a devil of a time a coupla weeks ago bleeding one out. After bleeding screw these tightly closed. Believe it or not, raising the side of the tractor could have been the needed difference to get the air out of the system and start the tractor.Įnclosed photos show the slope, how far I raised the side of the tractor, and the diesel lines replaced. After that the tractor started on the second try. Then I opened the bleeder screw and a little more air came out. That raised the bleeding screw on the pump to even slope or slightly on the upper side. So I jacked up the downhill side of the tractor and let some air out of the rear tire on the uphill side. The bleeder screw on the diesel fuel pump was on the downhill side. After trying to start the tractor for a while I put the tractor on the battery charger to try again later. After replacing the lines I bled the air from the lines per the process in the operator manual, but the tractor would not start. The old lines were cracked and starting to leak. Jeffrey D Osier mike lewis I am looking for my iseki I,m not sure the year.Forum Rules.
I would even be intrested in a good used or rebuild engine of the same HP or more as long as the motor will match up with my tractor. Will some one please let me know where I can find a rebuild kit for this engine at a reasonable price. Mark Jeffrey D Osier I need a rebuild kit for the engine. There is a Yahoo group for Iseki and Bolens deisels where you can find more help and info. Parts are available from Rainbow Distributors in Hawaii or from several folks this side of the puddle. Do you take credit cards? Another question where can I get air and oil filters? Do you have any manuals? You can just reply to this email or email me at home at pv86 bellsouth. How can you determine the year it was made? Iseki TS 1610 I was told it is a Paint is still good and low hours could be but I don't know for sure. Do you have a switch and a key in stock? Also I live in middle Tennessee near Nashville do you know of anyone who would work on it here? I would like to know the age of my tractor. It is shinny compared the rest of the engine. It looks like the starter has been replaced recently. But when you try to crank it will do nothing. The glow plug will light up and the low and high beam lights will come on. The first problem I have is the key worked it way out the first day I used it.
I understand parts might be hard to find.
0 kommentar(er)
